Electrolux Professional myPRO TE1120HP Heat Pump Tumble Dryer 8kg A++ 13A Plug At a Glance Size . H85 x W60 x D63cm 49kg freestanding front loader Power . 900W fitted 13A plug Capacity . 8kg load 120 Ltr drum Temperature . Up to 55°C Warranty . 2 years full manufacturer’s parts and labour warranty The Electrolux Professional myPRO TE1120HP is a commercial heat pump tumble dryer for hotels care homes and restaurants that wash on site. It takes an 8kg load in a 120 Ltr drum dries a full load in around 129 minutes and carries an A++ energy rating. Installation and Connection The dryer is fitted with a 13A UK plug and rated at 900W so it needs no hardwiring. Condensed water goes to a condensed water tank or to a direct drain. It measures H85 x W60 x D63cm and weighs 49kg and the front and top are stainless steel. Day-to-Day Use and Cleaning There are 16 professional programmes including eco and automatic settings. Professional Residual Moisture Control monitors the load in real time to shorten cycles and avoid over-drying with drying temperatures up to 55°C. A double-filter system protects the heat pump components and the maximum noise level is below 70dB. FAQs . Does it need hardwiring?No. It is fitted with a 13A plug and rated at 900W. Does it need a drain?No. Water can collect in the condensed water tank or you can connect it to a direct drain. What does the warranty cover?It comes with a 2 years full manufacturer’s parts and labour warranty.