The Type-C port can be used as a USB slave port for firmware flashing. Do not connect any other devices while flashing firmware using the Type-C port. Insufficient power supply during flashing may cause the device to fail to be recognized. The board has two USB 3.2 Gen1 ports by default, with a total maximum output power of 2A. When the device is powered on, do not plug or unplug any devices other than the USB and ports. To use PoE power, connect the PoE jumper to the EN position. This mini-board is designed for the Compute Module 5 Lite/eMMC series modules. It features an onboard CM5 slot, a Gigabit Ethernet RJ45 port, a 40-pin GPIO header, a 16-pin PCIe port, two USB 3.2 Gen1 Type-A ports, two USB 2.0 ports connected via 6-pin 1mm FFC connectors, two 4-channel MIPI ports, two ports, an RTC port, and more. An onboard BOOT button allows you to enter flashing mode by pressing the BOOT button before powering on and connecting the device to a computer via the Type-C port. It supports simultaneous display of different content on four screens. A new MIPI driver has been added; the system connect by default regardless of whether a screen is connected, and the screen be displayed in split-screen mode (depending on the system version)., Weight: 0.220462262 pounds, Manufacturer: Gishbjka