The ALEX solar LED floodlight is designed for wall mounting and is used for illuminating façades, entrances, driveways, and pedestrian pathways. The fixture is equipped with a 5.5W LED light source producing a luminous flux of 600 lm, emitting neutral white light at 4000K. Power is supplied by a 3.7V / 1200 mAh Li-ion battery, charged via a 5.5V / 200 mA solar panel. The solar panel is connected to the floodlight by an approximately 4.8 m cable, allowing installation in a location with optimal sunlight exposure, regardless of the lamp’s position. The design allows the panel and lamp to be mounted together on a single bracket or separately, depending on installation conditions. The device operates automatically after dusk and is equipped with a PIR motion sensor. It offers three operating modes: full power activation upon motion detection, medium brightness with switching to full power when motion is detected, and continuous lighting after dusk. Mode selection is done via a switch on the housing. With an IP44 protection rating, the unit is suitable for outdoor use under standard weather conditions. Full charging of the battery takes approximately 8 hours, depending on sunlight exposure. The set includes the floodlight, solar panel, connection cable, and mounting accessories. Recommended installation height is 3–5 meters.