Deceuninck uPVC Door Weather Bar - Rosewood - 800mm, with end caps and screwsA weather bar - also called a drip bar or rain deflector - is a slim uPVC profile fixed across the face of a door or window. Its drip nose throws rainwater clear of the joint below it, so wind-driven rain is not forced under the door or across the cill.- Genuine Deceuninck, virgin lead-free, UV-stable uPVC - will not rot, warp or fade the way a timber bar does- Colour: Rosewood (woodgrain foil)- Length: 800mm - cuts cleanly with a junior hacksaw, and the end caps finish the cut ends- Profile: 23mm high, 18mm projection- Supplied with a pair of end caps (left and right) and 3 self-drilling nipple screws- Fits uPVC, composite, aluminium and timber doors and windows - across the bottom of a door, over a door head or above a tilt & turn or casement window- Screws to the flat face of the frame - not into the glazing or the sealWhich length? Measure the opening between the door posts and choose that length or the next size up.How to fit: offer the bar up and get it level, drive the supplied self-drilling screws into the face of the door, then slide the bar over the screw heads. Run a line of silicone along the top of the bar if required; a dab of glue keeps the end caps in place.Also available in 500, 600, 700, 800, 900, 1000 and 1190mm, in twelve colours.Deceuninck weather bars are used by many of the biggest and most respected door manufacturers, such as Solidor, Hallmark and Endurance.Colours may look different depending on the device being used to view them.