Reinforced structural rigidity: a pressed rib runs across the corner of this galvanised steel bracket, adding genuine stiffness beyond a flat angle bracket and helping the joint resist flex and rotational movement under load, rather than relying on the fixings alone to hold it square. Fits timber, concrete and steel joints: built for 90 degree timber-to-timber, timber-to-concrete or timber-to-steel connections at a consistent 2.5mm steel thickness, so the bracket can be matched to the joint instead of over- or under-specifying one universal size. Suited to heavier framing: a larger size for pergola and gazebo post-to-beam joints and railway sleeper retaining walls, where the corner needs to stay rigid under wind, roof or retained-soil loading. Supplied as a pack of 2 angle brackets measuring 105x105x90mm, 2.5mm thick, finished in a silver galvanised coating, the exact quantity for the joints on your project without buying a larger box than the job needs. Backed by a tested load rating: connection strength of 35.2 kN, CE marked under a European Technical Assessment, plus a Fire reaction class of A1 (non-combustible), giving a known structural capacity to specify against rather than relying on an unrated generic bracket.