LavaTap HOT-TANK 2.4 Litre 1.5kW Boiling Water Tank Black Under Sink Unit 230V
From
£139.99
To
£157.49
FITS LAVATAP TAPS, AND OTHER BRANDS WITH AN ADAPTOR: A 2.4 litre replacement boiling water tank. If your tank has failed, keep your tap. The tank has a 3/8" BSP male inlet and outlet, so LavaTap 3-in-1 and 4-in-1 taps screw straight on. ProBoil 2X and Bristan taps need the 1/2" brass adaptor, and Ellsi, ETAL and Sauber taps the 6 mm push-fit adaptor: choose the tank pack with the matching adaptor. Check your thread size first, or message us a photo and we will confirm. UP TO 60 CUPS AN HOUR, 45 TO 98 °C: Up to 1.7 litres at up to 98 °C on demand, and up to 60 cups an hour for tea, coffee and cooking. Pick from 14 settings on the digital display. It reheats by itself when the water drops 5 °C below your setting. 1.5 kW element with a thermal cut-out, on a standard 230 V supply with a 13A plug and 110 cm lead. Insulated and quiet, and the display shows an error code if something needs a look. 5-YEAR HEATING ELEMENT GUARANTEE: The heating element is covered for 5 years and the sensor and control board for 2 years. Cover runs from installation and is for manufacturing faults in normal domestic use, held by the original buyer. Register within 30 days of installation, using the guarantee card in the box, because your cover is not active until you do. Buy it with a LavaTap tap and filter as a full kit and every part is covered for at least 2 years. WHAT KEEPS YOUR GUARANTEE VALID: Have it fitted by a qualified installer with genuine parts throughout. Fill the tank before you plug it in, and hand-tighten the 3/8" connections. Change the filter every 6 months with a genuine filter, and keep the receipts. Not covered: DIY installation, dry-firing, limescale or hard-water damage, frost, non-genuine parts or filters, and missed filter changes. FITS UNDER THE SINK: It measures 240 W x 330 H x 220 D mm. Stand it upright, indoors (0–35 °C) and uncovered, with 10–15 cm clear on three sides and room above for the hoses. It works at 1.5 to 5 bar water pressure. Fit a reducing valve if yours is above 5 bar. IPX4 splash protection. WATER FIRST, THEN POWER: Run the tap until the flow is steady. That fills the tank. Only then plug it in and switch on. A tank switched on empty burns out the element, and a dry-fired element is not covered by the guarantee.
LavaTap HOT-TANK 2.4 Litre 1.5kW Boiling Water Tank Black Under Sink Unit 230V
FITS LAVATAP TAPS, AND OTHER BRANDS WITH AN ADAPTOR: A 2.4 litre replacement boiling water tank. If your tank has failed, keep your tap. The tank has a 3/8" BSP male inlet and outlet, so LavaTap 3-in-1 and 4-in-1 taps screw straight on. ProBoil 2X and Bristan taps need the 1/2" brass adaptor, and Ellsi, ETAL and Sauber taps the 6 mm push-fit adaptor: choose the tank pack with the matching adaptor. Check your thread size first, or message us a photo and we will confirm. UP TO 60 CUPS AN HOUR, 45 TO 98 °C: Up to 1.7 litres at up to 98 °C on demand, and up to 60 cups an hour for tea, coffee and cooking. Pick from 14 settings on the digital display. It reheats by itself when the water drops 5 °C below your setting. 1.5 kW element with a thermal cut-out, on a standard 230 V supply with a 13A plug and 110 cm lead. Insulated and quiet, and the display shows an error code if something needs a look. 5-YEAR HEATING ELEMENT GUARANTEE: The heating element is covered for 5 years and the sensor and control board for 2 years. Cover runs from installation and is for manufacturing faults in normal domestic use, held by the original buyer. Register within 30 days of installation, using the guarantee card in the box, because your cover is not active until you do. Buy it with a LavaTap tap and filter as a full kit and every part is covered for at least 2 years. WHAT KEEPS YOUR GUARANTEE VALID: Have it fitted by a qualified installer with genuine parts throughout. Fill the tank before you plug it in, and hand-tighten the 3/8" connections. Change the filter every 6 months with a genuine filter, and keep the receipts. Not covered: DIY installation, dry-firing, limescale or hard-water damage, frost, non-genuine parts or filters, and missed filter changes. FITS UNDER THE SINK: It measures 240 W x 330 H x 220 D mm. Stand it upright, indoors (0–35 °C) and uncovered, with 10–15 cm clear on three sides and room above for the hoses. It works at 1.5 to 5 bar water pressure. Fit a reducing valve if yours is above 5 bar. IPX4 splash protection. WATER FIRST, THEN POWER: Run the tap until the flow is steady. That fills the tank. Only then plug it in and switch on. A tank switched on empty burns out the element, and a dry-fired element is not covered by the guarantee.
Price now:
From
£139.99
To