A cleaner, more attractive dust-free working environment for industrial and commercial floors For use on concrete and stone floors in the factory, warehouse, garage, corridor and utility room environments. Hard wearing polyurethane with an attractive mid-sheen finish. Resistant to many industrial chemicals and regular washing with water. Provides a cleaner, dust-free working environment. SPREADING RATE Up to 60 square metres per 5 litre, dependent on substrate. DRYING TIME Touch dry in 2-4 hours, dependent on ambient temperature, minimum over coating time of 16-24 hours. NOTE: Low temperatures can significantly extend the drying time. SHELF LIFE > Up to 2 years if stored correctly in an unopened container. PREPARATION All surfaces to be painted should be clean and dry, free from dust, dirt, grease, oil, laitance and loose or flaking materials. New concrete should be allowed to mature for a minimum of 6 months before paint can be applied. Chemically or mechanically hardened floors may need abrasion, prior to application. If in doubt always test a small area prior to use. Stir well before use. Supplied ready for use, Brush or Roller may apply Coverage will vary dependent on the nature and porosity of the substrate and the application method. Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with white spirit and allowed to dry. The Floor Paint is touch dry in 2-4 hours dependent on ambient temperature. Applying an even coat, 2 coats are normally required, allowing a minimum over coating time of 16-24 hours.