[SAFETY]: High quality replacement fill hose can be used for hot or cold water designed up to 93C Inlet hose for washing machines and dishwashers with hose in hose system. [CAN BE USED UP TO MAX. 90 °C. PRESSURE]: 0.2 to max. 10 bar. Hose made in Italy with VDE [CONNECTIONS]: 3/4 inch thread (union nut with 90° bend) for connection to the device, 3/4 inch thread (union nut, self-locking with safety valve) for connection to the tap, all union nuts are included, gasket. Can be used for all devices with 3/4 inch connection. [EXCEPTION]: Not for devices where an electrical cable runs along the hose on the inlet hose, these devices are controlled by a solenoid valve. TIPS: When connecting it to the washing machine please make sure that you use ptfe tape on the thread to avoid any leak, Please use professional to install the pipe, Don't run the machine until you have checked that it is installed properly and there are no leaks., Manufacturer: Dapetz