Galvanised steel narrow flat bracket (mending plate), finished in silver galvanic zinc, designed for reinforcing and joining timber wherever a low-profile, flush-fitting connector is needed. It is narrower than a standard flat bracket, so it sits neatly on slim timber sections and board edges without overhanging - making it the natural choice wherever a full-width mending plate would look bulky or foul an adjoining surface. The plate is used to splice or reinforce timber lengths, repair cracked or weakened joints, and join narrow timber sections edge-to-edge or face-to-face. Fixing holes are pre-punched along the full length of the plate and sized to take ring-shank nails (4mm), wood screws (4mm or 5mm), M5 bolts, or M5 concrete anchors where fixing into masonry - so the same bracket can be adapted from a quick nailed repair to a bolted, higher-strength connection simply by choosing a different fixing. The galvanic (electro-plated) zinc coating gives good general corrosion resistance for indoor use and sheltered outdoor applications, and the bright silver finish that this electro-plating process produces means the plate stays neat and presentable where it will remain visible after fitting, rather than only being hidden inside a joint.