Professional torque wrench for commercial or occasional own individual use 3/8in drive torque wrench3/8in drive calibrated torque wrenchTorque range varies from 10 – 80 ft/lbs / 13.6Nm – 108.5NmSuitable for all smaller vehicles / machinery (cars, bikes etc...) Smooth action mechanism provides accurate torque settings each timeEvery bolt on a modern vehicle has a torque setting and a torque wrench is essential to accurately judge how tight it isManufactured from CR-v steel for maximum strength and durability3/8in drive so will fit any 3/8in drive sockets, extensions, torx / star / hex bits etc... When the required torque setting is reached the wrench produces an audible click and a slight release of tension (to prevent from over tightening) Clockwise torque setting only but can be used to undo nuts and bolts by the switch of a lever on the ratchet headSmall torque wrench so perfect for access in restricted areasDesigned to be utilised where accurate torque loads are requiredLocking nut on the handle to set required torque settingsNon slip handles especially useful in slippy oily conditionsDual scale marked in both ft/lbs and Nm (foot pounds and Newton meters) Comes in a blow molded case for easy storage and transportationSPECIFICATIONS•Torque Wrench •Micrometer adjustable torque wrench•Drive size – 3/8in•Torque Range – 10 - 80 ft/lbs / 13.6Nm – 108.5Nm•Scale marked in both - ft/lbs and Nm•Total length of the torque wrench – 370mm•Locking nut on the handle•Bi-directional drive•Non Slip grip handle•Blow molded case for storage•Complete with conversion scale.