Broken Stud / Bolt / Nut Extractor / Remover / Removal Tool 1/2\"" Drive mm AT830\n\n \n\nDescription\n\nFor loosening a damaged nut which can not be undone by a socket or spanner \n\n Reverse spiral flute designed to bite down to provide maximum gripping power. \n\n Only used on nuts that have a positive thread. \n\n This tool can be used where a nut could not loosen in a normal manner because of rust and deformation. \n\n Manufactured from chrome vanadium steel and impacted for extra strength. \n\n 1/2\"" drive so can be used with any 1/2\"" drive ratchet / bar etc... \n\n Total length of the items 150mm. \n\n Comes complete a solid straight 12mm drift 160mm long and what this is for is that if the wheel nut gets stuck in the end put it through the socket and knock it out with a hammer. \n\n Set Includes;: \n\n1 x 17mm socket \n\n1 x 19mm / 3/4 socket \n\n1 x 21mm socket \n\n1 x 22mm socket \n\n1 x solid drift 12mm x 160mm \n\n Supplied in a blow molded case for easy storage and .