Exact match for Manufacturer Paint Code: 22C, GAR Autotek Vauxhall Carbon Flash is compatible with Vauxhall Antara, Astra, Corsa, Insignia, Meriva, Mokka & Zafira models from 2008 onwards. Autotek’s unique acrylic based exact colour match range accommodates a wide variety of paint colours from several manufacturers. The paints contain protective properties that ensure optimum quality and longevity when applied to metal, glass fibre or rigid plastic surfaces. The fast-drying formula provides a strong and durable coat, ensuring a smooth, high quality, professional finish with unrivalled colour match precision. It is also suitable for cellulose finishes and is compatible with nearly all automotive paint finishes. Directions: Preparation: 1. Clean area and ensure surface is free from dirt, rust, wax oil etc. 2. Mask off area to avoid overspray. 3. Apply a minimum of two coats of Autotek Grey Primer for optimum adhesion and the best possible finish. Application: 1. Shake aerosol well for approximately 2 minutes. 2. Spray from a distance of 15-25cm away from the surface to be treated. Spray aerosol upside down for 2-5 seconds after each application to prevent blockages from forming in the nozzle. 3. Build up with several thin coats, allowing 10-20 minute intervals between coats. Paint should be touch dry in 10-20 minutes. 4. Leave to fully cure for 24 hours. Note: Only use outdoors or in a well-ventilated area at temperatures between 15°C-25°C. Use only as directed.