Bartoline Direct to Rust Multi-Surface Paint White 400ml Bartoline Direct to Rust Multi-Surface Paint is a tough, weather resistant formula which can be applied directly to rusted metal as well as wood, plastic and ceramic surfaces. Suitable for interior and exterior jobs, there is no need for a separate primer as the advanced formula acts as a primer, undercoat and topcoat simultaneously. The paint also provides great protection and leaves a wonderfully smooth finish. Directions:  Ensure surface to be treated is clean, dry and free from dirt, oil, grease deposits, etc. Use a stiff brush or steel wool to remove loose corrosion and other surface contaminants. Shake aerosol well for approximately 2 minutes. Continue to shake regularly throughout the application process. Spray on to desired surface from a distance of 15-25cm. Apply 2-3 thin coats for even coverage, leaving 15–20 minute intervals between each coat. Allow 24 hours to fully harden. After use, invert can and spray for 2-5 seconds to prevent blockages forming in the nozzle. Note: Only use outdoors or in a well-ventilated area at temperatures between 15 degrees & -25 degrees Celcius. Store in a cool, dry place. Do not use in direct sunlight.