Armstead Trade Floor PaintArmstead Trade Floor Paint is a professional quality, solvent-based, general purpose floor paint that delivers a touch and durable smooth floor finish. Suitable for use on interior concrete, wood and metal surfaces. Resistant to foot traffic and light rubber-wheeled vehicular traffic.Tough & durable smooth floor finishResistant to foot trafficFor light industrial useSolvent basedDrying time (recoat)16-24 hoursDrying time (touch dry)4-6 hoursSuitable SurfaceConcrete, Wood, FloorsCoverageUp to 16m2/litreGeneral No. of Coats2Application descriptionSTIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Armstead Trade Floor Paint (up to 1 part white spirit to 10 parts paint). The normal finishing process is 1 or 2 full coats of Armstead Trade Floor Paint. Touch dry: 4-6 hours. Recoat: 16-24 hours. It is essential to allow the coated floor to dry for a minimum of 24 hours under well-ventilated conditions before use. Coverage up to 16m²/l on smooth surfaces of average porosity.CleaningCleaning After Final Use: Clean brushes and rollers immediately after final use to reuse them for future projects, saving you money and reducing waste. Cleaning Steps: 1. Remove Excess Paint: Scrape off leftover paint into a container for reuse. 2. Use Brush Cleaner: Use Polycell Brush Cleaner to clean brushes and rollers. 3. Reuse Brush Cleaner: Allow the paint solids to settle and reuse the cleaner by pouring the clear liquid into another container. 4. Dry Naturally: Let tools air-dry and store in a dry, dust-free area. Dispose Responsibly: Dispose of the remaining solids and used brush cleaner at a hazardous waste facility. Do not pour any solvent-based paint, brush cleaner or washings down the drain or onto the ground. Do not flush paint down the drain, including when cleaning painting tools.