The mag-aligner has not only\nproved devastating for carp but also for tench, bream, chub and barbel.\nFollow the instructions below. \n\nRob recommends 1 to 1.5 mtrs of lead core leader tied to the lead, and\na sinking coated hook length, such as Suffix heavy skin, fished\nhelicopter style.\nUsing a sharp pointed baiting needle, pierce the maggot I mm from the\nblunt end, and then run the needle up through the centre and out the\nsame side of the maggot about I mm from the pointed end. (See fig 1).\nNow tie on your hook. (Rob recommends a size 10 ESP big T raptor) and\nslide the maggot down the hook link and push it over the eye of the\nhook and along the shank to the position shown in fig 2. Now remove the\nlast 25mm of plastic coating closest to the hook, and hook on\n2 real maggots. Tie a PVA sock of real maggots to the lead (Rob uses an\nAtomic knobbly lead) and nick the hook through it, ( fig 3) ensuring\nthe point remains outside of the bag.\nsee our ebay shop\nfor other Enters