The John Guest Speedfit braided flexi hose with union nut provides a quick connection between pipe and a male-thread appliance, such as a tap. Push the fitting fully onto the pipe, then screw the union nut onto the appliance thread. To remove the push-fit connection, push the collet towards the fitting body and pull out the pipe. Its flexible design is suitable for installation in confined spaces and avoids the need for hot works, glue or flux. The braided stainless steel outer layer helps protect the internal feed, while the Grip and Seal collet uses stainless steel teeth and an O-ring seal. Compatible with Speedfit PEX and polybutylene plastic pipe when inserts are used, and with copper pipe. For hot and cold water only, rated at 6 bar at 65 °C. Designed, manufactured and assembled in the UK. Push-fit connection with a union nut for joining pipe to a male-thread appliance such as a tap. Supports flame-free installation without hot works, glue or flux. Braided stainless steel outer layer helps protect the internal feed from damage. Grip and Seal collet with stainless steel teeth and an O-ring seal helps create a secure connection. Compatible with Speedfit PEX and polybutylene plastic pipe when inserts are used, and with copper pipe. Suitable for hot and cold water only, with a rating of 6 bar at 65 °C. Designed, manufactured and assembled in the UK. 1000 mm hose with 22 mm x 3/4 inch connection size.